Start Up Instructions - Garland MULE 1162 NRQG Manual De Instrucciones

English

6. START UP INSTRUCTIONS

6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Machine
• Milling cutter set
• Transportation wheel
• Spur
• Pulley cord
• Plant-protecting plates
• Handlebar
• Belt cover
• Gear level
• Instruction manual
• Pneumatic wheels
Carefully inspect the product to ensure that there are
no damaged elements. If you find any damaged or
missing parts, do not use the machine until the defect
has been repaired or all the missing pieces replaced.
Using the machine without all of its parts or with
defective parts can cause severe personal injury.
6.2. ASSEMBLY
6.2.1. INSTALLATION OF THE SPUR
Place the spur (1) in the chasis of the machine and
insert the bolt (2) fixing it with the circlip pin (3).
Introduce the spur (4) and fix it at the desired height
using the bolt (5) and the circlip pin(6).
5
6
4
6.2.2. ASSEMBLING THE MILLING CUTTERS
Warning! The cutting edge of the blade must be in
the direction of the rotation of the milling cutters.
Interior milling cutters (double) and exterior (individual)
are mounted.
Install the milling cutters (1) securing with pins (2) and
the circlip pin.
2
1
3
On the exterior, place the plant-protecting plates (3)
fixed with pins (2) and the circlip pin
42/184
1
2
3