Garland MULE 1162 NRQG Manual De Instrucciones página 43

6.2.3. GUARD ASSEMBLY
Install the protective exteriors with screws.
Note: For the installation of the left guard, the belt
cover must be removed in order to have access to the
screws.
6.2.4. BELT COVER ASSEMBLY
Place belt cover and tighten the 2 screws.
6.2.5. TRANSPORTATION WHEEL ASSEMBLY
Secure the transport wheel by holding it with the
screw and nut (1).
Secure the bolt with circlip pin in the desired position
(position of transport) (2) or (3) work position.
2
3
6.2.6. HANDLEBAR ASSEMBLY
Place the serrated base on the lower handle (1), the
upper handle (2), the wing nut washer (3) and screw
without tightening the wing nut (4).
2
1
Adjust the handlebar to the position in which you are
comfortable to get the job done and tighten the wing
nut (4) to leave the handlebar firmly in place.
6.2.7. GEAR LEVEL ASSEMBLY
43/184
English
1
4
3