Tabla de contenido
EU DECLARATION OF CONFORMITY
Manufacturers:
WEG EQUIPAMENTOS ELÉTRICOS S.A.
Av. Prefeito Waldemar Grubba, 3000
89256-900 - Jaraguá do Sul – SC – Brazil
www.weg.net
WEG Linhares Equipamentos Elétricos
S.A.
Rod. BR 101, Km 161,5, s/n.
Distrito Industrial Rio Quartel. Bairro Rio
Quartel de Baixo
29915-500 – Linhares – ES – Brazil
www.weg.net
WEG MEXICO, S.A. DE C.V
Carretera Jorobas - Tula Km 3.5,
Manzana 5, Lote 1, Fraccionamiento
Parque Industrial Huehuetoca, Municipio
de Huehuetoca, C.P. 54680, CD. de
Mexico y Área Metropolitana – Mexico
www.weg.net/mx
The manufacturer declares under sole responsibility that:
W01, W11, W12, W20, W21, W22, W40, W50, W60, HGF, Roller Table, W21 Magnet, W22 Magnet, Pump/Filter and
when installed, maintained and used in applications for which they were designed, and in compliance with the relevant installation
standards and manufacturer's instructions, comply with the provisions of the following relevant European Union harmonization
legislation, wherever applicable:
Regulation (EC) No 640/2009* and Regulation (EU) No 4/2014* (valid until June 30th, 2021);
Regulation (EU) 2019/1781*(valid from July 1st, 2021); Directive 2009/125/EC*; RoHS Directive 2011/65/EU* and its
amendments (including Directive 2015/863/EU); Machinery Directive 2006/42/EC**;
EMC Directive 2014/30/EU (electric motors are considered inherently benign in terms of electromagnetic compatibility).
The fulfilment of the safety objectives of the relevant European Union harmonization legislation has been demonstrated by
compliance with the following standards, wherever applicable:
EN 60034-1:2010 + AC:2010 / EN 60034-2-1:2014 / EN 60034-5:2001 + A1:2007 / EN 60034-6:1993/
EN 60034-7:1993 + A1:2001 / EN 60034-8:2007 + A1:2014/ EN 60034-9:2005 + A1:2007 / EN 60034-11:2004/
EN 60204-1:2018 / EN 60204-11:2019 / EN IEC 63000:2018 and EN 60034-25:2018.
CE marking in: 1996
* Electric motors with a voltage rating higher than 1000V are not under the scope.
** Low voltage electric motors are not considered under the scope and electric motors designed for use with a voltage rating higher than 1000V
are considered partly completed machinery and are supplied with a "Declaration of Incorporation":
The products above cannot be put into service until the machinery into which they have been incorporated has been declared in conformity with
the Machinery Directive.
A Technical Documentation for the products above is compiled in accordance with part B of annex VII of Machinery Directive 2006/42/EC.
We undertake to transmit, in response to a reasoned request by the national authorities, relevant information on the partly completed machinery
identified above through WEG authorized representative established in the European Union. The method of transmission shall be electronic or
physical method and shall be without prejudice to the intellectual property rights of the manufacturer.
Jaraguá do Sul, March 4
, 2021
th
Signed for and on behalf of the manufacturer:
Rodrigo Fumo Fernandes
Engineering Director
Brazil
WEG (JIANGSU) ELECTRIC
EQUIPMENT CO., LTD.
No. 88, Huimin West Road, Chengbei
Street, Rugao City, Jiangsu Province
– China
www.weg.net/cn
WEG (NANTONG) ELECTRIC MOTOR
Manufacturing CO., LTD.
No. 128# - Xinkai South Road, Nantong
Economic & Technical Development
Zone, Nantong, Jiangsu Province – China
www.weg.net/cn
WEG electric motors and components used for following motor lines:
Low Voltage Directive 2014/35/EU*;
EN 60034-12:2017 / EN 60034-14:2018 / EN 60034-30-1:2014/
Declaration of Incorporation:
Edson José Koshinski
Engineering Director
China
WQuattro
Bruno Mauro Burdzaki
Industrial Director
Mexico
WEGEURO – INDUSTRIA
ELECTRICA S.A.
Headquarters:
Rua Eng. Frederico Ulrich,
Zona Industrial da Maia Sector V
4470-605 – Maia – Portugal
www.weg.net/pt
Contact person: Luís Filipe Oliveira
Silva Castro Araújo
Authorised Representative in the
European Union
(Single Contact Point)
Branch – Santo Tirso:
Rua António Joaquim Campos
Monteiro, 510
Santa Cristina do Couto
4780-165 – Santo Tirso – Portugal
www.weg.net/pt
Luis Filipe Araujo
Industrial Director
Portugal
Tabla de contenido
