KENMORE ELITE 790.75503 Manual De Uso página 20

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Setting Oven
Controls
FEATURE OVERVIEW
• Delayed Timed Bake
Delayed Timed Bake:
For a Delayed Start Time and to Shut Off Automatically:
1. Be sure that the clock shows the correct time of day (example 1:30).
2. Place the food in the oven.
3. Push BAKE TIME. "— —:— —" and the words "BAKE", "TIME" will be
displayed.
4. Push and hold the UP ARROW until the desired baking time appears in the
display. The baking time can be set for any amount of time from 5 minutes to
11 hours and 59 minutes. When setting the baking time, the time will appear in
the display and increase in 5 minute increments (example 55 minutes).
5. Push STOP TIME. The time when the baking will stop will appear in the display
window. The words "BAKE"," STOP"and "TIME" will be displayed.
6. Push and hold the UP ARROW pad until the time you want the cooking to be
completed appears in the display (example 4:00).
7. Push BAKE. "— — —°" and "DELAY BAKE" will be displayed.
8. Push and hold the UP ARROW until the desired baking temperature appears
inn the display.
9. If the baking temperature is not set, the control will beep. "— — —°" and the
words "DELAY BAKE" will be displayed; the word "BAKE" will flash.
10. The control will calculate backward from the set stop time to determine when
the baking should start. The words "DELAY" and "BAKE STOP TIME" will
remain displayed.
11. The baking will come on automatically at the calculated time. The words
"DELAY" and "BAKE" will go out and "ON" will appear. The main display will
shown the oven baking time and count down by minutes until it reatches
":00".
12. To cancel the countdown, press CLEAR OFF.
When the set BAKE TIME runs out:
1. ":00" will appear in the display window and the oven will shut off
automatically.
2. The control will beep 3 times.
3. The control will then continue to beep once every 10 seconds for 5 minutes or
until CLEAR OFF is pushed.
INSTRUCTIONS
20
DISPLAY

Capítulos

Tabla de contenido
loading

Tabla de contenido