Setting The Clock - KENMORE ELITE 790.75503 Manual De Uso

Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash.
To Set the Clock: (example 1:30)
1. Push CLOCK. The word "TIME" will appear in the display. The
timer allows you 5 seconds to go to step 2.
2. Push and hold the UP or DOWN ARROW to set the time of day to
1:30. The word "TIME" will disappear after 6 seconds and the clock will
start. You may also push CLEAR OFF; the word "TIME" will
disappear and the clock will start.
Minute Timer
Note: The minute timer does not start or stop cooking and is not active during self-clean. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The minute timer can be used independently during any of the bake or
broil functions. The timer can be set for any amount of time from 5 seconds to 9 hours and 55 minutes.
To Set the Minute Timer
1. Push TIMER ON/OFF. ":00" and the word "TIMER" will be displayed.
2. Push and hold the UP ARROW until the desired time appears in the
display. As soon as the UP ARROW is released, the time will begin to
count down in the display.
3. When the set time has run out, the timer will beep 3 times and will
continue to beep once every 10 seconds for 5 minutes or until TIMER
ON/OFF is pushed.
When setting the minute timer
for:
5 seconds to 1 minute 59 seconds
2 minutes to 9 minutes. 59 seconds
10 minutes to 59 minutes 59 seconds
1 hour to 9 hours 55 minutes
To Change the Minute Timer:
Push and hold the UP or DOWN ARROW to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push and hold the DOWN ARROW until ":00" appears in the display or push TIMER ON/OFF.
INSTRUCTIONS
INSTRUCTION
The time will appear in the
display and increase in:
5 second increments
10 second increments
1 minute increments
5 minute increments
11
Setting the
Clock
FEATURE OVERVIEW
• Clock
• Minute Timer
DISPLAY
DISPLAY