Adjust The Brakes - Vermeiren D200 Manual De Instrucciones

Change the seat height according the following steps:
3.4

Adjust the brakes

L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
1.
Remove the rear wheels (see § 2.13).
2. Remove the screw from the plate.
3. Assemble the plate in the right hole of the side
frame, see Table 2.
4. Check if the axle bushings are fastened well.
5. Remove the screw from the front fork and
wheels.
6. Place it according table 2.
7. Install the front wheels and tighten it. Check if it
turn smoothly, but there is no space for motion.
8. Mount the rear wheels.
9. If installed properly the fork of the front wheels
and the ground must be perpendicular. Check
this.
10.
Adjust the brakes according § 3.4.
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
Page 17
D200
2014-08
