Functions Indication Table - Ideal TightSight 61-757 Manual De Operación Y Seguridad

Functions Indication Table

Func- Description
tion
Auto Auto detects and displays most pertinent range for measured value.
Range
LCD Total of two LCDs (front and bottom). Bottom LCD displays same numbers as
front display for all functions, displays a "-" symbol for all negative readings,
displays "AC" for alternating current or "DC" for direct current and displays
"Amps" for current measurement.
LCD White backlight for both front and bottom display.
Backlight
Flashlight White flashlight, turns on or off with LCD blacklight simultaneously.
High 1) Effective setting: ACV / DCV.
Voltage 2) In ACV/DCV, voltage measurement value: ACV/DCV ≥30V, LCD displays
Alarm high voltage alarm lightning symbol
"
3) In voltage measure, the voltage data is out of range and LCD displays "OL",
and high voltage alarm lightning symbol
"
Regular 1) When turning the dial switch to any setting position except OFF, the buzzer
Prompt will beep one time and NCV LED flashes one time.
2) When the button selection is valid, the buzzer will beep one time; When the
button is invalid, the buzzer will beep twice
3) About 1 minute before the automatic shutdown, the buzzer will beep 5 times
continuously, and 1 long beep before the unit shuts down.
4) When the automatic shutdown function is canceled, the buzzer will beep 5
times when it reaches the APO time setting.
Over LCD displays "OL" when over range is encountered.
Range
Indication
" Simultaneously the NCV LED is on and beeping lasts
for 1 second and then goes silent during measurement.
" Simultaneously NCV LED is on and beeping lasts
for 1 second and then goes silent during measurement.
20