Ideal 61-773 Manual De Instrucciones
Ocultar thumbs Ver también para 61-773:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

1000A TRMS Clamp Meters
w/TightSight™ Display
Instruction Manual
TightSight™ Display
#61-773
#61-775
HOLD
PEAK
>2 Sec
600
1000
V
V
Read First: Safety Information
Understand and follow operating instructions carefully. Use the meter only as specified in
this manual; otherwise, the protection provided by the meter may be impaired.
WARNING
To avoid possible electric shock, personal injury or death, follow these guidelines:
• Do not use if meter appears damaged. Visually inspect the meter to ensure case is not
cracked and back case is securely in place.
• Inspect and replace leads if insulation is damaged, metal is exposed, or probes are
cracked. Pay particular attention to the insulation surrounding the connectors.
• Do not use meter if it operates abnormally as protection maybe impaired.
• Do not use during electrical storms or in wet weather.
• Do not use around explosive gas, dust, or vapor.
• Do not apply more than the rated voltage to the meter.
• Do not use without the battery and the back case properly installed.
• Replace battery as soon as battery indicator
• Remove the test leads from the circuit prior to removing battery cover.
• Do not attempt to repair this unit as it has no user-serviceable parts.
CAUTION
To protect yourself, think "Safety First":
• Voltages exceeding 30VAC or 60VDC pose a shock hazard so use caution.
• Use appropriate personal protective equipment such as safety glasses, face shields,
insulating gloves, insulating boots, and/or insulating mats.
• Before each use:
- Perform a continuity test by touching the test leads together to verify the
functionality of the battery and test leads.
- Use the 3 Point Safety Method. (1) Verify meter operation by measuring a known
voltage. (2) Apply meter to circuit under test. (3) Return to the known live voltage
again to ensure proper operation.
• Use the proper terminals, functions and range for your measurements.
• Never ground yourself when taking electrical measurements.
• Connect the black common lead to ground or neutral before applying the red test lead to
potential voltage. Disconnect the red test lead from the voltage first.
• Always work with a partner.
• When using the probes, keep fingers as far behind the probe tips as possible.
appears to avoid false readings.
2
Tabla de contenido
loading

Resumen de contenidos para Ideal 61-773

  • Página 7: Pinza Amperométrica De 1000 A Con Pantalla Tightsight

    Lea primero: Información de seguridad #61-773 Comprenda y siga estas instrucciones de operación cuidadosamente. Utilice el instrumento #61-775 sólo según se especifica en este manual; de lo contrario, la protección que él proporciona podría deteriorarse. ADVERTENCIA Para evitar una posible descarga eléctrica, lesiones personales o la muerte, siga estas Pinza amperométrica de 1000 A con pantalla...
  • Página 8: Iconos De La Pantalla Principal

    (APO) Características específicas del modelo: 21. Retención de datos • El modelo 61-773 es con sensado de valor eficaz verdadero 22. Máximo/Mínimo • El modelo 61-775 incluye sensado de valor eficaz verdadero y medida de corriente 23. PICO continua (CC) 24.
  • Página 9 OPERACIÓN Característica de apagado automático (APO) Advertencia de alto voltaje (Hi-V) El instrumento se desactiva automáticamente después de 30 minutos sin uso. Si en esa El instrumento produce un pitido y se enciende un LED cuando se mide más de 30 V CA en la situación pulsa cualquier botón, el instrumento se reactiva e indica en su pantalla la última función de voltaje de corriente alterna y más de 30 V CC en la función de corriente continua.
  • Página 10: Medida De Voltaje

    Medida de voltaje: Verificación de continuidad ( • Verifique que el circuito esté desenergizado. • El instrumento detecta el nivel de resistencia y emite un pitido si la resistencia es menor que 30 Ω para confirmar que existe continuidad.. Circuito Circuito inter- cerrado rumpido...
  • Página 11: Reemplazo De La Batería

    Servicio y repuestos: Esta unidad no contiene piezas reparables por el usuario. Para obtener información N12966 sobre piezas de repuesto o para averiguar acerca del servicio, comuníquese con IDEAL Aislamiento doble INDUSTRIES, INC. al 1-877-201-9005 o visite nuestro sitio web, www.testersandmeters.com.
  • Página 12: Alcances Y Exactitudes

    6.0% + 5 6.0% + 5 0.0 a 750.0V por dos años contados a partir de la fecha de compra. Durante este período de garantía, IDEAL (100Hz a 400Hz) (100Hz a 400Hz) INDUSTRIES, INC. reemplazará o reparará la unidad defectuosa, a la sola opción de IDEAL, sujeto 0.0-600.0V...

Este manual también es adecuado para:

61-775

Tabla de contenido