Ocultar thumbs Ver también para 61-795:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Insulation Tester
Instruction Manual
1
#61-795
Read First: Safety Information
Understand and follow operating instructions carefully. If this tester is not used
in a manner specifi ed by IDEAL, protection provided by the product may be
impaired.
WARNINGS
To avoid possible electric shock, personal injury or death follow these
instructions:
Do not use if meter appears damaged.
Visually inspect the meter to ensure case is not cracked and back case is
securely in place.
Inspect and replace leads if insulation is damaged, metal is exposed, or
probes are cracked. Pay particular attention to the insulation surrounding
the connector.
Do not use meter if it operates abnormally as protection maybe impaired.
Do not use during electrical storms or in wet weather.
Do not use around explosive gas, dust, or vapor.
Do not apply more than the rated voltage to the meter.
Do not use without the battery and the back case properly installed.
Remove the test leads from the meter before removing battery cap.
Do not attempt to repair this unit as it has no user-serviceable parts.
Disconnect power and discharge capacitors before testing resistance,
continuity or insulation.
Replace battery as soon as low battery indicator
false readings.
Use the proper terminals, function and range for your measurements.
Use care as this tester outputs a high voltage to measure insulation
resistance.
Comply with local and national safety requirements, including the use of
appropriate personal protective equipment.
To protect yourself, think "Safety First":
Voltages exceeding 30VAC or 60VDC pose a shock hazard so use caution.
Use appropriate personal protective equipment such as safety glasses, face
shields, insulating gloves, insulating boots, and/or insulating mats.
>605V
Before each use:
- Perform a continuity test by touching the test leads together to
- Use the 3 Point Safety Method. (1) Verify meter operation by measur-
+
verify the functionality of the battery and test leads.
ing a known voltage. (2) Apply meter to circuit under test. (3) Return to
the known live voltage again to ensure proper operation.
2
appears to avoid
Tabla de contenido
loading

Resumen de contenidos para Ideal 61-795

  • Página 7 #61-795 Lea primeramente: Información de seguridad Asegúrese de entender y seguir cuidadosamente las instrucciones de operación. Si el equipo no se utiliza de la manera especifi cada por IDEAL, la protección que proporciona puede verse reducida. Medidor de aislamiento ADVERTENCIAS Manual de Instrucciones Para evitar posibles riesgos de electrocución, lesiones o la muerte, siga estas...
  • Página 8: Auto - Indica El Modo De Selección

    • Antes de cada uso. • – indica que deben reemplazarse las baterías para - Realice una prueba de continuidad poniendo en contacto los cables de evitar lecturas falsas. prueba entre sí para verifi car el funcionamiento de la batería y los cables. •...
  • Página 9: Resistencia (Ω)/Continuidad

    Voltaje - CA y CC Resistencia (Ω)/Continuidad • Pulse para encender el instrumento Encienda el instrumento. dos veces para seleccionar Ω/ Por defecto, el instrumento adopta el modo VAC (V). Pulse • • Para seleccionar VDC (V), pulse una vez. Inserte los cables de prueba en los terminales de entrada correspondientes.
  • Página 10 Resistencia de aislamiento Reemplazo de batería y fusible 1. Pulse para encender el instrumento. 2. Pulse para seleccionar el voltaje de prueba de 1000, 500 ó 250 V. 3. Inserte los cables de prueba en los terminales de entrada correspondientes del instrumento. 4.
  • Página 11: Mantenimiento

    Mantenimiento Rangos (alcances) y exactitudes Conversor de CA: El modelo 61-795 es con sensado de promedio y calibrado Limpie la carcasa con un paño húmedo y un detergente suave. No use en valor efi caz. abrasivos ni solventes. Exactitud: La exactitud se especifi ca como +/- (un porcentaje de la lectura + una cantidad fi...
  • Página 12: Garantía

    LCD de 9999 unidades /4” compra. Durante este período de garantía, IDEAL INDUSTRIES, INC. Frecuencia de 2.0/s podrá, a la sola opción de IDEAL, reemplazar o reparar las unidades actualización: defectuosas, sujeto a verifi cación del defecto o falla. Fuera de rango: Aparece “OL”...

Tabla de contenido