Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

660A TRMS Clamp Meters
w/TightSight™ Display
Instruction Manual
TightSight™ Display
#61-763
#61-765
Understand and follow operating instructions carefully. Use the meter only as specified in
this manual; otherwise, the protection provided by the meter may be impaired.
To avoid possible electric shock, personal injury or death, follow these guidelines:
• Do not use if meter appears damaged. Visually inspect the meter to ensure case is not
• Inspect and replace leads if insulation is damaged, metal is exposed, or probes are
• Do not use meter if it operates abnormally as protection maybe impaired.
• Do not use during electrical storms or in wet weather.
• Do not use around explosive gas, dust, or vapor.
• Do not apply more than the rated voltage to the meter.
• Do not use without the battery and the back case properly installed.
• Replace battery as soon as battery indicator
• Remove the test leads from the circuit prior to removing battery cover.
• Do not attempt to repair this unit as it has no user-serviceable parts.
CAUTION
To protect yourself, think "Safety First":
• Voltages exceeding 30VAC or 60VDC pose a shock hazard so use caution.
• Use appropriate personal protective equipment such as safety glasses, face shields,
• Before each use:
• Use the proper terminals, functions and range for your measurements.
• Never ground yourself when taking electrical measurements.
• Connect the black common lead to ground or neutral before applying the red test lead to
• Always work with a partner.
• When using the probes, keep fingers as far behind the probe tips as possible.
600
1000
V
V
Read First: Safety Information
WARNING
cracked and back case is securely in place.
cracked. Pay particular attention to the insulation surrounding the connectors.
insulating gloves, insulating boots, and/or insulating mats.
- Perform a continuity test by touching the test leads together to verify the
functionality of the battery and test leads.
- Use the 3 Point Safety Method. (1) Verify meter operation by measuring a known
voltage. (2) Apply meter to circuit under test. (3) Return to the known live voltage
again to ensure proper operation.
potential voltage. Disconnect the red test lead from the voltage first.
appears to avoid false readings.
2
Tabla de contenido
loading

Resumen de contenidos para Ideal 61-763

  • Página 7: Pinza Amperométrica De 600 A Con Pantalla Tightsight

    #61-763 Lea primero: Información de seguridad #61-765 Comprenda y siga estas instrucciones de operación cuidadosamente. Utilice el instrumento sólo según se especifica en este manual; de lo contrario, la protección que él proporciona podría deteriorarse. ADVERTENCIA Pinza amperométrica de 600 A con pantalla Para evitar una posible descarga eléctrica, lesiones personales o la muerte, siga estas...
  • Página 8: Íconos De La Pantalla Tightsight

    • Iluminación de fondo brillante y nítida (APO) Características específicas del modelo: 22. Retención • Los modelos 61-763 y 61-765 son con sensado de valor eficaz (rms) verdadero, medida 23. Mín/Máx de voltajes de CA/CC, capacitancia, corriente alterna y frecuencia 24. Pico •...
  • Página 9 OPERACIÓN: Desactivación de la característica de apagado automático (APO) El instrumento se desactiva automáticamente después de 30 minutos sin uso. Si en esa situación Advertencia de alto voltaje (Hi-V) pulsa cualquier botón, el instrumento se reactiva e indica en su pantalla la última lectura tomada El instrumento produce un pitido y se enciende un LED cuando se mide más de 30 V CA en la antes de desactivarse.
  • Página 10: Medida De Voltaje

    Medida de voltaje: Verificación de continuidad ( • Verifique que el circuito esté desenergizado. • El instrumento detecta el nivel de resistencia y emite un pitido si la resistencia es menor que 30 Ω para confirmar que existe continuidad. Circuito Circuito cerrado interrumpido...
  • Página 11: Reemplazo De La Batería

    (Auto Power Off – APO): cuencia Vida de la batería: 100 horas continuas, con batería alcalina (61-763 y 61-765) Indicación de batería El símbolo [ ] aparece en la pantalla durante alrededor de una hora descargada: cuando el voltaje de la batería es insuficiente.
  • Página 12: Alcances Y Exactitudes

    750V CA ef. (45Hz a 100Hz) (45Hz a 100Hz) por dos años contados a partir de la fecha de compra. Durante este período de garantía, IDEAL 6.0% + 5 6.0% + 5 INDUSTRIES, INC. reemplazará o reparará la unidad defectuosa, a la sola opción de IDEAL, sujeto 0.0 a 750.0V...

Este manual también es adecuado para:

61-765

Tabla de contenido