Optional Accessories - Stanley SBI20 Manual De Instrucciones

Selecting the direction of rotation ( Fig. E)
For tightening, use forward (clockwise) rotation. For
loosening, use reverse (counterclockwise) rotation.
♦ To select forward rotation, push the forward/reverse
slider (2) to the left.
♦ To select reverse rotation, push the forward/reverse
slider to the right.
♦ To lock the tool, set the forward/reverse slider into the
centre position.
Screwdriving / nut setting
♦ Select the appropriate bit / socket for the screw or nut
to be driven.
♦ Select forward or reverse rotation as described above.
♦ Hold the tool in line with the fastener.
♦ After tightening, check torque with a torque wrench.
LED work light
The LED work light (7) is activated automatically when the
trigger is depressed. The LED work light will illuminate when
the trigger is partially depressed, before the unit begins
running.
State of charge indicator
The tool is fitted with a state of charge indicator. This can
be used to display the current level of charge in the battery
during use.
♦ Press the state of charge indicator button (9).
Hints for optimum use
Screwdriving
♦ Always use the correct type and size of screwdriver bit.
u If screws are dif cult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
♦ Always hold the tool and screwdriver bit in a straight line
with the screw.
MAINTENANCE
Your Stanley tool has been designed to operate over a long
period of time with a minimum of maintenance. continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
WARNING! To minimize the danger of serious
personal injury, please switch off the tool power and
disconnect all plugs before adjusting or removing/
installing any accessory. Before reassembling the tool,
press and release the trigger switch to make sure the tool is
already switched off.
WARNING! Before performing any maintenance on corded/
cordless power tools:
Lubrication
Stanley tools are properly lubricated at the factory
and are ready for use.
Tools should be lubricated regularly every year depending
on usage. (Tools used on heavy duty jobs and tools
exposed to heat may require more frequent lubrication.)
This lubrication should be attempted only by trained power
tool repairperson's such as those at Stanley service centers
or in other qualified service personnel.
Cleaning
WARNING! Regularly clean the ventilation slots in your tool using a soft brush or dry
cloth.
WARNING! Never use solvents or harsh
chemicals to clean non-metal parts of the
tool. These chemicals may weaken the
material of the parts. Use only mild soap
and damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse
any part of the tool into liquid.
¡IMPORTANT! To ensure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed in
this manual) should be performed by
authorized service centers or other qualified
organizations,
replacement parts. Unit contains no user
service able parts inside.

Optional Accessories

WARNING! Since accessories, other than those
offered by Stanley, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only Stanley,
recommended accessories should be used with this product.
The performance of any power tool is dependent upon the
accessory used. Stanley accessories are engineered to
high quality standards and are designed to enhance the
performance of power tool. By using Stanley accessories
will ensure that you get the very best from your Stanley tool.
Stanley offers a large selection of accessories available at
our local dealer or authorized service center at extra cost.
Remarks
Stanley's policy is one of continuous improvement to our
products and, as such, we reserve the right to change
product specifications without prior notice. Standard
equipment and accessories may vary by country. Product
specifications may differ by country. Complete product
range may not be available in all countries. Contact your
local Stanley dealers for range availability.
Protecting The Environment
Separate collection.
This product must not be disposed of with normal
household waste.
Should you find one day that your Stanley product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Please sort it out for
separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Some local governments may require the local or municipal
waste disposal centers or retailers of new products to
ENGLISH (
Original Instructions)
always using identical
23