Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Capacity
A
B
C
D
E
F
G
R min
R max
1
Extensible arm
2
capacity according
3
to its position
4
2000 kg
138,5 cm
188 / 215 / 216,5 / 229,5 cm
173,5 cm
104,5 cm
18 cm
66 / 75 / 83 / 89 cm
80 cm
100 cm
154 cm
500 kg
1000 kg
1500 kg
2000 kg
ASSEMBLY INSTRUCTIONS
During the assembly procedure, nuts and
bolts should be hand-tightened only.
Once assembly is complete, nuts and
bolts must be fully tightened.
1. Attach four 3½" swivel castors (12)
and two 3" swivel castors (11) to base
frame using bolts M8x20 (20), lock
washers Ø8 (30) and nuts M8 (25)
2. Referring to the spare parts drawing,
insert two legs (4) into the base (1)
and lock the legs in place using four
locking pins (5), secure these in place
using four split R pins (6).
3. Attach the main post (3) to the base
assembly (1) using bolts M14x100
(18), flat washers Ø14 (27) and nuts
M14 (23).
4. Now secure the boom (2) to the main
post (3) using bolt M16x120 (13), flat
washer Ø16 (26) and nut M16 (22).
5. Attach support straps (7) to top of
main post using bolt M16x110 (14),
flat washer Ø16 (26) and nut M16
(22).
6. Attach support straps (7) to the base
using bolts M16x100 (15), flat washers
Ø16 (26) and nuts M16 (22).
7. Connect bottom of ram unit (9) to
main post (3) using bolt M16x90 (16),
flat washer Ø16 (26) and nut M16
(22).
8. Assemble boom (2) on the post (3) by
using bolt M16x120 (13), flat washer
Ø16 (26) and nut M16 (22), while
helper holds boom up, connect top
of hydraulic ram to boom using bolt
M16x80 (17), flat washer Ø16 (26) and
nut M16 (22).
9. Slide boom extension (8) into the
main boom (2),secure in one of the
four positions using bolt M14x100
(18), flat washer Ø14 (27) and nut
M14 (23).
10. Tighten all nuts and bolts.
E N G L I S H
9
Tabla de contenido
