Features; Technical Data; Operation Instructions - Urrea LI1120 Manual Del Usuario

tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
USAGE AND CARE OF BATTERY TOOLS
1.- Recharge only with the charger specified by
the manufacurer. A charger other than the one
specified may cause a fire or damage to the bat-
tery.
2.- Use the tools only with battery packs spe-
cifically designed for that tool. The use of any
other battery pack may create a fire and dam-
age hazard.
3.- When the battery is not in use, keep away
from metal objects such as clips, coins, keys,
nails, screws, or any other small metal object
that can connect one terminal to another. Con-
necting one terminal to another can cause burns
and fires.
4.- Under severe conditions, liquid may spill
from the battery; avoid contact. If you acciden-
tally come in contact with the liquid, wash it off
with water immediately. If the liquid gets into
your eyes, get medical help. Spilled liquid from
the battery can cause irritation or burn.
SERVICE: tool service must be performed only
by qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
10

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1
2
3
4
1. 1/2 Square driver
2. LED Worklight
3. Trigger Switch
4. Mode Selector
5. Vents
6. Direction of rotation selector
7. Belt Clip

TECHNICAL DATA

LI1120
SQUARE DRIVER
BATTERY
CHARGER INPUT
CHARGER OUTPUT
SPEED
IMPACTS PER MINUTE
MÁX. TORQUE
WEIGHT

OPERATION INSTRUCTIONS

WARNING: If any part is broken or missing, DO
NOT attempt to attach the battery pack, or op-
erate the tool until the broken or missing part is
replaced. Failure to do so could result in possible
serious injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modifica-
5
6
7
1/2" (12,7 mm)
20V
120V
20V
(0-2200) rpm
3000
170 Nm
1,5 kg (3,3 lb)