Important Safeguards - Hamilton Beach BrewStation 48274 Manual Del Usuario

840163600 v04.qxd 9/11/07
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs. Care must
be taken, as burns can occur from touching hot parts or from
spilled, hot liquid.
3. To protect against electric shock, do not place cord, plug or
BrewStation ® in water or other liquid.
4. Close supervision is necessary when any appliance is used by
or near children.
5. Unplug from outlet when either the BrewStation
not in use and before cleaning. Allow to cool before putting
on or taking off parts and before cleaning the appliance.
6. BrewStation ® must be operated on a flat surface away from
the edge of counter to prevent accidental tipping.
7. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions or is dropped or damaged in
any manner. Call our toll-free customer service number for
information on examination, repair, or adjustment.
8. The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
2
1:40 PM Page 2

IMPORTANT SAFEGUARDS

® or clock is
SAVE THESE INSTRUCTIONS!
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch
hot surfaces, including stove.
11. The coffee tank is designed for use with this BrewStation
must never be used on a range top or in a microwave oven.
12. Do not place BrewStation ® on or near a hot gas or electric
burner or in a heated oven.
13. To disconnect BrewStation ®
plug from wall outlet.
14. Scalding may occur if the cover is lifted during the brewing
cycle.
15. WARNING! To reduce the risk of fire or electric shock,
do not remove the bottom cover. No user serviceable parts
are inside. Repair should be done by authorized service
personnel only.
16. Do not use appliance for other than intended use.
® . It
, turn controls to OFF , then remove