Maintenance And Care; Troubleshooting; Before Returning For Repairs - Schumacher CR8 Manual Del Usuario

10. MAINTENANCE AND CARE

10.1 After use and before performing maintenance, unplug and disconnect the battery
charger.
10.2 Use a dry cloth to wipe all battery corrosion and other dirt or oil from the connector,
cords and the charger case.
10.3 Store inside, in a cool, dry place.

11. TROUBLESHOOTING

PROBLEM
CHARGING/CHARGED
LED is flashing.
BAD BATTERY
is lit.
The charger will not
turn on when properly
connected.

12. BEFORE RETURNING FOR REPAIRS

If these solutions do not eliminate the problem, or for more information
about troubleshooting, contact customer service for assistance:
or call 1-800-621-5485, Monday-Friday 7:00
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO
NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.
POSSIBLE CAUSE
The battery's charge is
80% or higher.
LED
Charger is in abort mode.
AC outlet is dead.
Poor electrical connection.
Battery is defective.
[email protected]
www.batterychargers.com
No problem; this is normal.
Do not continue trying to
charge the battery. Have the
battery checked or replaced.
Check for open fuse or
circuit breaker supplying the
AC outlet.
Check power cord and
extension cord for a loose
fitting plug.
Have the battery checked.
am
• 7 •
REASON/SOLUTION
to 5:00 CST
pm