Power Supply Specifications - ESAB Cutmaster 60 Manual De Instrucciones

ESAB CUTMASTER 60

2.04 Power Supply Specifications

Input Power
Input Power Cable
Output Current
Power Supply Gas Fil-
tering Ability
Ambient Temperature
All Units
* NOTE: The duty cycle will be reduced if the primary input power (AC) is low or the output
voltage (DC) is higher than shown in this chart.
NOTE!
IEC Rating is determined as specified by the International Electro-Technical
Commission. These specifications include calculating an output voltage based upon
power supply rated current. To facilitate comparison between power supplies, all
manufacturers use this output voltage to determine duty cycle.
Power Supply Dimensions & Weight
12"
305 mm
15"
381 mm
43 lb / 19.5 kg
2-2
ESAB Cutmaster 60 Power Supply Specifications
400 VAC (360 - 440 VAC), Three Phase, 50/60 Hz
Power Supply includes input cable.
Cable for 400V 3 Phase.
20 - 60 Amps, Continuously Adjustable
Particulates to 5 Microns
ESAB Cutmaster 60 Power Supply Duty Cycle *
Duty Cycle Ratings @ 40° C (104° F)
Operating Range 0° - 50° C
Ratings
Duty Cycle
Current
DC Voltage
Art # A-12888
24"
610 mm
INTRODUCTION
IEC CE IEC
40% 60%
60A 60A 50A
104 104 100
Ventilation Clearance Requirements
24"
610 mm
6"
150 mm
CE IEC CE
100%
50A 30A 30A
100 92 92
Art # A-07925_AB
300x5395