All Cid Records; Hanging The Attery - GE 21018 Guía De Usuario

3. Press the DEL button. The display shows DELETE CALL ID?
4. Press the DEL button to erase the record showing in the display. The
display shows DELETED .
NOTE: Press the *EXIT key to return to the standby mode.
D A CID R
ELETING LL
1. Make sure the phone is OFF (not in talk mode).
2. Use the CID/VOL (/\ or \/) button to scroll to any CID record.
3. Press and hold the DEL button until DELETE ALL? shows in the display.
4. Press DEL button to erase all of the current CID records. The display
shows DELETED followed by NO CALLS .
NOTE: Press the *EXIT key on the handset to return to the standby mode.
C
HANGING THE
CAUTION: To reduce the risk of fire or personal injury, use only the
battery 5-2522 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk
mode) before you replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery
pack from the jack inside the battery
compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and reconnect
the battery plug.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset
charge cradle to charge. If you don't charge
the handset battery properly (for 16 hours) when you first set up the
phone and/or when you install a new battery pack, the battery 's long-
term performance will be compromised.
ECORDS
B
ATTERY
Battery
compartment
Battery
pack
plug
Battery compartment jack
Battery
pack
33