Required Accessories And Tools; Supplied Accessories; Optional Accessories; Other - Gaggenau RB 492 Instrucciones De Instalación

Ocultar thumbs Ver también para RB 492:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Required accessories and tools

Supplied accessories

Installation instructions
Operating instructions
Installation kit

Optional accessories

Installation accessories for Side-by-Side installation
For permanent connection of two individual appliances,
e.g. Freezer next to Refrigerator.
Lateral additional heating
If the gap between the appliances is less
than 6" (160 mm).
Connecting element for furniture doors
For connection of two door panels (see explanation in
Section "4. Preparing the furniture doors"). Can be used
for standard height door panels without further
preliminary work.
Miscellaneous
Stepladder
Dolly, hand truck
Hammer drill for drilling holes in wall or floor
Bits according suitable for material and in different
sizes
Wooden beam (cross section min. 3" x 4") as an
alternative tip protection, length according to the
width of the installation niche
Wooden screws in different sizes
Thin plywood sheet, particle board or cardboard to
protect the floor from damage
Suitable material for covering and protecting
furniture (e.g. protective sheets)
Adhesive tape
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.

Tools

Cordless screwdriver
T20 Torx-bit magnetic
holder
T20 Torx screwdriver
5
/
" (8 mm) socket
16
wrench
Various size drills
1
Open end wrench
/
"
2
(SW 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable
blade
Metal tape measure,
folding ruler
Square
2' (60 cm) and 4' (1 ,2 m)
spirit levels
Level, min. 4' (1 ,2 m) long
11
Tabla de contenido
loading

Este manual también es adecuado para:

Rb 472

Tabla de contenido