Using Siri Eyes Free; Settings; Basic Setting Operation; General Settings - Sony XAV-W651BT Manual De Instrucciones

Using Siri Eyes Free

Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the microphone.
This function requires you to connect an iPhone to
the unit via BLUETOOTH. Availability is limited to
iPhone 4s or later. Make sure that your iPhone is
running the latest iOS version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with the
unit in advance. For details, see "Preparing a
BLUETOOTH Device" (page 7).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press and hold SOURCE.
The voice command display appears.
3
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Touch [Close].
Notes
• The iPhone may not recognize your voice depending on
usage conditions. (For example, if you are in a moving car.)
• Siri Eyes Free may not function properly, or the response
time may lag in locations where iPhone signals are difficult
to receive.
• Depending on the iPhone's operating condition, Siri Eyes
Free may not function properly, or may quit.
• If you play a track with an iPhone using the BLUETOOTH
audio connection, when the track starts playback via
BLUETOOTH, Siri Eyes Free automatically quits and the unit
switches to the BLUETOOTH audio source.
• When Siri Eyes Free is activated during audio playback, the
unit may switch to the BLUETOOTH audio source even if
you do not specify a track to play.
• When connecting the iPhone to the USB port, Siri Eyes Free
may not function properly, or may quit.
• When connecting the iPhone to the unit via USB, do not
activate Siri with the iPhone. Siri Eyes Free may not
function properly, or may quit.
• There is no audio sound while Siri Eyes Free is activated.
18
GB

Settings

Basic Setting Operation

You can set items in the following setup categories:

General Settings,

Screen Settings,
1
Press HOME, then touch [Settings].
2
Touch one of the setup category icons.
The items that can be set differ depending on
the source and settings.
3
Touch / to select the desired item.
To return to the previous display
Touch .
To switch to the playback screen
Touch .
General Settings
Language
Selects the display language: [English],
[Español], [Français].
Time Format
Changes the time format: [12-hour], [24-hour].
Clock Time
Sets the clock time by the RDS data: [OFF], [ON].
Clock Adjust
Sets the clock time manually.
(Available only when [Clock Time] is set to [OFF].)
Beep
Activates the operation sound: [OFF], [ON].
Dimmer
Dims the display: [OFF], [Auto], [ON].
([Auto] is available only when the illumination
control lead is connected, and works when the
head light is turned on.)
Dimmer Level
Adjusts the brightness level when the dimmer is
activated: –5 to +5.
Touch Panel Adjust
Adjusts the touch panel calibration if the
touching position does not correspond with the
proper item.
Output Color System
Changes the color system according to the
connected monitor (SECAM is not supported):
[NTSC], [PAL].
(Available only when no source is selected.)
Sound Settings,
Visual Settings