Replacement Parts And Equipment; Genuine Stihl Replacement Parts; Disposal; Disposal Of The Chain Saw - Stihl MS 462 C-M Manual De Instrucciones

English
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of § 5.11 of
ANSI/OPEI B175.1 when used on this model chain saw with
the matching chain sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of § 5.11 of ANSI/
OPEI B175.1 when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback
STIHL guide bars. The listed chains are green-labeled low
kickback STIHL chains.
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.

26 Replacement Parts and Equipment

26.1 Genuine STIHL Replacement Parts

STIHL recommends the use of genuine STIHL replacement
parts. Genuine STIHL parts can be identified by the STIHL
part number, the
STIHL parts symbol . The symbol may appear alone on
small parts.

27 Disposal

27.1 Disposal of the Chain Saw

STIHL products must not be thrown in household trash or
disposed of except as outlined in this manual.
► Take the chain saw, accessories and packaging to an
approved disposal site for environmentally friendly
recycling.
► Contact your authorized STIHL servicing dealer for the
latest information on disposal and recycling.
64
logo and, in some cases, by the
26 Replacement Parts and Equipment

28 Limited Warranty

28.1 STIHL Incorporated Limited Warranty Policy

This product is sold subject to the STIHL Incorporated
Limited Warranty Policy, available at www.stihlusa.com/
warranty.html. It can also be obtained from your authorized
STIHL dealer or by calling 1-800-GO-STIHL
(1-800-467-8445).

29 Emission Control Warranty

29.1 STIHL Incorporated Federal Emission Control

Warranty Statement

Your Warranty Rights and Obligations
The U.S. Environmental Protection Agency (EPA) and
STIHL Incorporated are pleased to explain the Emission
Control System Warranty on your equipment type engine. In
the U.S. new 1997 and later model year small off-road
equipment engines must be designed, built and equipped, at
the time of sale, to meet the U.S. EPA regulations for small
non road engines. The equipment engine must be free from
defects in materials and workmanship which cause it to fail
to conform with U.S. EPA standards for the first two years of
engine use from the date of sale to the ultimate purchaser.
STIHL Incorporated must warrant the emission control
system on your small off-road engine for the period of time
listed below provided there has been no abuse, neglect or
improper maintenance of your small off-road equipment
engine.
Your emission control system includes parts such as the
carburetor and the ignition system. Also included may be
hoses, and connectors and other emission-related
assemblies.
0458-790-8621-A