Layout And Items Supplied - EINHELL TC-TS 820 Manual De Instrucciones Original

alcohol or medication. A moment of inatten-
tion when using the electric tool can result in
serious injuries.
•
Do not use an electric tool with a defective
switch. An electric tool that cannot be swit-
ched on or off is dangerous and must be
repaired.
•
Keep unused electric tools out of the reach of
children. Do not allow people who are not fa-
miliar with the tool or who have not read these
instructions to use the tool. Electric tools are
dangerous if they are used by inexperienced
people.
•
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
•
If the connection lead on the electric tool is
damaged, it must be replaced by a specially
prepared connection lead available from our
customer service organization.
•
Have your tool repaired only by trained per-
sonnel using only genuine spare parts. This
will ensure that you tool maintains its safety
standard.
•
The machine has to be set up where it can
stand securely.
•
All covers and safety devices have to be pro-
perly fitted before the machine is switched on.
•
It must be possible for the blade to run freely.
•
When working with wood that has been pro-
cessed before, watch out for foreign bodies
such as nails or screws etc.
•
Before you actuate the On/Off switch, make
sure that the saw blade is correctly fitted and
that the machine's moving parts run smoothly.
•
Follow the instructions for lubrication and
changing tools.
•
Keep handles dry, clean and free from oil and
grease.
•
Keep the push stick or handle for a push
block at the machine at all times, even when
you are not using them.
•
Use only the transport device for transporting
the machine.
•
While you are moving the machine it is best
to cover the top part of the blade, for example
using a guard.
Do not lose these safety instructions.
Anl_SA_TC_TS_820_SPK8.indb 34 Anl_SA_TC_TS_820_SPK8.indb 34
GB

2. Layout and items supplied

2.1 Layout (Fig. 1-3, 7-8, 11-14)
1. Sawing table
2 Saw blade guard
3 Push stick
4 Saw blade
5 Splitter
6 Table insert
7 Parallel stop
8 Motor
9 Power cable
10 Stand
11 On/Off switch
12 Locking grip for parallel stop
13 Scale for angle setting
14 Locking grip
15 Screw for saw blade guard
16 Cable holder (for machine transport)
17 45° stop/cross stop
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Splitter
•
Carbide-tipped saw blade
•
Parallel stop
•
Push stick
•
Blade change tool
•
Bench-type circular saw
- 34 -
14.02.2018 08:34:16 14.02.2018 08:34:16