Kokido K900CBX Manual Del Propietário página 16

1. Pull the cable gently and carefully to lift the cleaner to the water surface. Lift it by
the handle and hold one end of the cleaner with the other hand and tilt it above the
water for about 10-15 seconds to drain out the water left inside before carrying it
away from the pool.
Note:
- In order to avoid scratching/damaging the pool (particularly vinyl and soft wall pools),
avoid contact with the pool walls while removing the cleaner from the water.
2. Place the cleaner on a stable and flat surface and pull the side knob outward to
release the cover.
CAUTION! Never detach the cover directly by force without releasing the knobs as it
could damage the unit and the knobs.
3. Lift and remove the filter tray (together with the mesh filter plate).
4. Remove the debris thoroughly from the inside of the cleaner.
5. Use water to clean the mesh filter plate. Note: If the mesh filter plate is damaged,
replace the unit before next operation.
To detach the mesh filter plate from the tray, push the hook to release its position on
the notch along the frame.
Replace the new mesh filter plate by pressing the small hooks to the notches.
6. Put the filter tray (installed with mesh filter plate) back on the cleaner.
7. Position the cover correctly by aligning and placing its bottom flange into the filter
tray. Push the side knobs outward to allow the cover go into the correct position.
15