CAUTION! Never push forcefully to attach the cover directly as it could damage the unit
and the side knobs.
Tips: If you encounter the below troubleshooting with your cleaner, then perhaps it is
necessary to clean the filter bags as well as the interior of the cleaner:
- Cleaner slows down considerably
- Cleaner fails to remove debris
- Cleaner turns in different path constantly
Storage of the cleaner
- Reverse the steps of assembly to disassemble the cable from the Power Supply and
Control unit. Use a clean cloth to sweep the Power Supply and Control unit and cable.
The cable should be coiled for storage.
- Drain the water from the cleaner.
- Use clean water to flush 1) the interior and exterior of the cleaner 2) the filter tray ,
mesh filter plate and cover (interior and exterior).
- Place the cleaner on a clean and level surface free of any sharp object that could
damage the cleaner.
- Store in a dry, sheltered area where the temperature is between 5°C – 35°C.
- Do not leave the cleaner and its components to dry in direct sunlight.
- The Power Supply & Control unit should not be left exposed in the rain or placed in
puddles of water.
Never store the cleaner and its components close to any pool chemicals as chemical
fumes and / or spills could cause severe corrosive damage to them.
WARNING! Cleaner and components must be kept away from being used as means of
access to the pool by children.
16