Kokido K900CBX Manual Del Propietário página 12

Setting 3 (recommended when cable twist happens on Setting 1)
Nozzle setting
Moving path
Setting 4 (recommended when cleaner does not reach all pool areas)
Nozzle setting
Moving path
Because the propelling nozzle can be turned 360°, after
implementing aforementioned settings, make sure the
smallest flap on the propelling nozzle opening is positioned
at the bottom. Here is an example of the nozzle set at 0°
degree marking.
In case it is difficult to clean
debris from certain spots or
corners, turn propelling nozzle
to 180° from the original
degree setting (smallest flap is
therefore positioned on top)
to divert water jetting towards
the pool floor in order to
move the debris or fine
particles to an area where the
cleaner has access.
0° / 20°
0° / 40°
11