Lead Warning; Fuse Warning; Sel Button - Ideal 61-337 Instrucciones De Uso

Lead Warning

Lead Warning:
lead into any amperage input terminal, but
the rotary function switch IS NOT set to
the correct relative amperage position, the
meter will beep at 3Hz, LCD will display
"LEAd" and "
amperage function is selected first, but the
test lead IS NOT in the relative amperage
input jack,the meter will also beep at 3Hz
and the LCD will display "LEAd" and
" .", flashes at 3Hz.

SEL Button

When inserting the test
.", flashes at 3Hz. If any
The SEL Button allows the user to toggle between multiple
functions when the function dial is used to select a specific
function. This can include but is not limited to toggling between
degrees F and C, AC and DC voltage or current, continuity,
resistance, capacitance and diode measurements.

Fuse Warning

Fuse Notification:
CANNOT be short circuited or used for
measuring while testing the fuse.
1. If the 400mA/600V fuse is blown,
setting the rotary switch to the "mA"
or "uA" setting, the LCD will display
"FUSE" and "
will beep continuously at the same time.
2. If the 10A/600V fuse is blown, setting
the rotary switch to the "A" setting, the
LCD will display "FUSE" and "
and the buzzer will beep continuously at
the same time.
The test leads
.", and the buzzer
.",
14