Replacing The Fcb Pcb - NAMCO MAZAN Manual Del Operador

7-8

Replacing the FCB PCB

1. Remove the PCB Base.
2. Disconnect the three connectors.
3. Remove 4off pozi head screws (M3x6), with flat and spring washers, and remove
the FCB PCB.
Pozi head screw (with flat washer) (M3 x 6)
PCB base
FCB PC board
4. Re-assemble in reverse order.
(see 7-7 (4) page 73)
Page 74
Connectors