Removing The Sensors - NAMCO MAZAN Manual Del Operador

7-13

Removing the Sensors

1. Remove the Sensor Assy.
2. Remove 1off cap bolt (M4x20) and detach the adjusting spring.
3. Remove 2off cap screws (M5x8).
Cap screw (M4x20)
4. Remove 3off pozi head screws (M4x45).
5. Remove the Sensors, Spacer and Collars.
Sensor Base
6. Reassemble in reverse order.
Ensure that the spacer and collar are in the correct positions.
(see 7-12 page 78).
Sensor Assy
Adjusting spring
Cap screw (M5x8)
Sensor
Collar
Page 79
Spacer
Sensor
Pozi head screw
(M4x45)