Replacing The Ball Assy - NAMCO WORLD KICKS Manual De Instrucciones

8-1

Replacing the Ball Assy

1. Remove 4off hex head screw (M8x40), with flat and spring washer, and remove
the Ball Assy and Ball Mounting Wood.
2. Replace the Ball Assy, ensuring that the Ball Mounting Wood is refitted.
Note: The holes in the ball, ball mounting wood and kicker assy are not equally
spaced. Ensure that all holes line-up before fitting any screws.
Ball Assy
Narrow spacing
Wide spacing
NOTE
Mounting holes are
not equally spaced.
Page 59
Ball mounting wood
Hex head screw (M8x40)
with spring washer (M8)
and flat washer (M8)
Kicker Assy