Operation Instructions - Urrea EB1006 Manual De Usuario Y Garantía

INSTALLING THE COOLANT TRAY
1. Hang the cool-
ant tray (1) on the
clips (2).

OPERATION INSTRUCTIONS

WARNINGS:
• Do not attempt to operate this tool until you
have read thoroughly and understand com-
pletely all instructions, safety rules, etc., con-
tained in this manual. Failure to comply can
result in accidents involving fire, electric shock,
or serious personal injury. Save this operator's
manual and review frequently for continuing
safe operation and
may use this tool.
• To prevent personal injury, never operate
the bench grinder unless the safety shields and
spark deflectors are properly installed and in
place.
• Never sharpen or grind anything made of
aluminum.
• Excessive pressure on a cold wheel may cause
the wheel to crack.
STARTING AND STOPPING THE GRINDER
The "ON / OFF" switch has a removable, black
plastic key. With the key removed from the
switch, unauthorized and hazardous use by
children and others is minimized.
1. To turn the
grinder "ON", in-
sert key (1) into
the slot of the
switch (2), and
move the switch
to the "ON" posi-
tion.
instructing others who
E N G L I S H •
2. To turn the grinder "OFF", move the switch
to the "OFF" position.
3. To lock the switch in the "OFF" position,
grasp the end, of the switch key, and pull it
out.
4. With the switch key removed, the switch will
not operate.
5. If the switch key is removed while the grind-
er is running, it can be turned "OFF" but can-
not be restarted without inserting the switch
key.
CAUTION:
Always lock the switch "OFF" when the grinder
is not in use. Remove the key and keep it in
a safe place. In the event of a power failure,
blown fuse, or tripped circuit breaker, turn the
switch "OFF" and remove the key, preventing
an accidental startup when the power comes
on.
ADJUSTING THE SPEED OF GRINDER
Your grinder is equipped with a variable speed
control knob. The speed of the grinder may be
adjusted by simply rotating the variable speed
control knob.
1. To increase speed, rotate the variable speed
control knob clockwise.
2. To reduce speed, rotate the variable speed
control knob counterclockwise.
IMPORTANT
• Always wear safety goggles or safety glasses
with side shields during power tool operation
or when blowing dust. If operation is dusty,
wear a dust mask.
• When grinding, metal objects become heated
quickly. It is important to keep moving the ob-
ject back and forth across the grinding wheel
and to cool the object frequently.
To be efficient and work as designed, your
tools should be kept sharp. Dull tools can and
will cause accidents.
GENERAL INFORMATION
Bench Grinders are ideal for sharpening tools
such as chisels, planer blades, scissors, etc., and
for removing rust or corrosion.
Grinders remove material rapidly so pressure is
the key to efficient grinding. The proper way
to sharpen a tool and avoid overheating is:
U se r's m a n ua l
15