Retrieving A Configuration (Recall) - Promax PROLINK-3 Premium Manual De Instrucciones

If a configuration is stored in a memory location already containing information,
that data will be lost.
3. (Optional) If you wish to assign a name to a memory position press key
the fist character of the name will blink, turn the rotary selector [4] and the
different characters will appear in the first position of the configuration name.
When you have chosen the first character press the rotary selector again [4] to
automatically move on to the second character. Repeat the process for a
maximum of four characters.
4. (Optional) A memory position may be assigned to the name of a previously edited
DiSEqC program, thereby associating it with the execution of the memorised
measuring configuration.
Whenever it is established a satellite configuration will appear the DiSEqC
parameter. In order to activate it, accede by means of the key
pressing the rotary selector [4] to view the list of edited programs (See section
'4.9.4.18 DiSEqC Command Generator') and select the program to execute.
Figure 45.- STORE screen, storing a measuring configuration.
5. Finally, press
stored. If any other key is pressed, an error will be indicated and the memory will
not be updated.

4.12.2 Retrieving a Configuration (RECALL)

Press the
shows the different parameters of each measuring configuration stored. Turning the
rotary selector [4] select the configuration to be retrieved (a number between 1 and 99).
Pressing the [25] key again or the rotary selector [4] will retrieve the configuration.
Page 88
[25] key or the rotary selector [4] and the configuration will be
[25] key. The screen RECALL will appear on the monitor which
USER'S MANUAL. PROLINK-3/3C Premium
[31],
[31] and
06/2005