Direct Access To Functions; Printing The Spectrum, The Measurements And Memories - Promax PROLINK-3 Premium Manual De Instrucciones

USER'S MANUAL. PROLINK-3/3C
Figure 46.- RECALL screen, retrieving a measurement configuration.
4.13

Direct Access to Functions

Keys [28] and
TV and Spectrum Analyser mode functions menus. To establish a relationship between
the direct access key and a function, access the functions menu, select the function you
wish to access directly and press key
press key [28] or
To directly execute a previously edited DiSEqC program, pressing the key
assigned to the program will execute the memorised command.
4.14

Printing the Spectrum, the Measurements and Memories

By connecting the instrument to a serial printer it is possible to obtain the
spectrum showed on screen or a printed report of a sequence of measurements just at
the moment they are taken, or later, if they are recorded with the Datalogger function.
This enables the user to keep a file about the state of the system and provide the
documents related to the level measurements for analysis purposes. The CI-23 portable
printer is a PROLINK-3/3C
The installation process consists of simply using the data transfer cable to
connect the printer to the RS-232C connector [37] on the PROLINK-3/3C
(see section '4.14.1 Handshake and control lines'). Switch off the power to both
instruments before connecting.
To print the spectrum showed select the function Print on the function menu in
the Spectrum Analyser mode.
06/2005
Premium
[29] give direct access to any of the functions on the
[28] or
[29] the function will be accessed directly.
Premium optional accessory.
[29]. From then on when you
Premium
Page 89