Nicam Channel - Promax PROLINK-3 Premium Manual De Instrucciones

USER'S MANUAL. PROLINK-3/3C
Figure 35.- Calibrate function selection for Sat IF Test.
2.- MEASUREMENT OF THREE PILOTS THROUGHOUT THE NETWORK
Once PROLINK-3/3C
point where it will be connected the satellite dish (signal source) and start to take level
measurements in the different distribution outlets using the PROLINK-3/3C Premium.
On the screen will appear the attenuation values for the three pilot frequencies
measured in the outlet plug (see the following figure).
Figure 36.- Attenuation measurements in a plug.
In order to finish of measuring, press the rotary selector [4] and select from
FUNCTIONS menu the End Test option.
4.9.4.15

NICAM Channel

Use this function to verify NICAM sound modulations in stereo and dual, you can
also select the sound channel coming over the speaker.
To change the decoded channel access the TV mode functions menu, select the
Nicam channel function, and press the rotary selector to activate it. The monitor will
show a screen labelled NICAM offering two possibilities: Channel A and Channel B.
Turn the rotary selector [4] to the desired option and finally press to activate.
06/2005
Premium
FUNCTIONS
CALIBRATE
END TEST
BATTERY& LNB
DISEqC
NEXT
Premium has been calibrated, connect the RP-050 to the
10
FUNCIONES
0
-10
-20
1050.0 MHz
1575.5 MHz
REF. 90.0 dBuV 91.0 dBuV
78.0 dBuV
TEST 74.3 dBuV
12.0 16.7
ATT.
1/2
2100.0 MHz
90.5 dBuV
65.0 dBuV
25.5
Page 71