Adjusting Color Of Picture; Adjusting Tint Of Picture - Alpine CVA-1003 Manual De Operación

Other Useful Features

Adjusting Color of Picture

Color adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes. Color
adjusment cannot be made if a Navigation system
with the RGB feature is connected.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select COLOR.
3
Press the g DN or f UP button to make
the color of the picture brighter or darker
respectively to get your desired color. You can
adjust the color between MIN (–16) and MAX
(+16). When it reaches the minimum or
maximum point, the display shows "MIN" or
"MAX" respectively.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTE
The Color setting for the Blue screen background and the
Color of the Picture source (AUX/DVD/NAV.) will be
individually memorized.
32
-EN
All manuals and user guides at all-guides.com
SETUP
g g g DN g g
f UP f f
f f
Preset 1
Preset 2

Adjusting Tint of Picture

Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjusment cannot be made if a Navigation
system with the RGB feature is connected.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select TINT.
3
Press the g DN or f UP button to adjust
the Tint (between –16 and +16). When it reaches
the minimum or maximum point, display shows
"R MAX" or "G MAX" respectively.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTE
The TINT setting for the Blue screen background and the
TINT of the Picture source (AUX/DVD/NAV.) will be
individually memorized.