Warning
This microscope is a scientific precision instrument designed to last for many years with a minimum of main-
tenance. It is built to high optical and mechanical standards and to withstand daily use.
We remind you that this manual contains important information on safety and maintenance, and that it must
therefore be made accessible to the instrument users.
We decline any responsibility deriving from incorrect instrument use uses that does not comply with this
manual.
Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label.
However, users have full responsibility to use this equipment safely.
Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.
Package Contents
DESCRIPTION
Microscope stand with nosepiece, stage, condenser
Optical head (trinocular)
Objective PLAN IOS MET 4x
Objective PLAN IOS MET 10x
Objective PLAN IOS MET 20x
Objective PLAN IOS MET 50X
Eyepiece WF10X/20mm
Metallographic attachment
Polarizer & Analyzer filters
Glass insert for sample support
Dust cover
Power supply output 6Vdc
Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the contain-
er and lift the top half of the container. Take care to ensure that the optical items (objectives and eyepieces)
do not fall out and get damaged. Using both hands (one around the neck and one around the base), lift the
microscope from the container and put it on a stable desk.
Place the observation head onto the top of the neck and tighten the lock-screw. Insert the eyepieces into the
eye tubes.
Connect the provided power supply to the power supply input jack on the rear of the microscope.
All manuals and user guides at all-guides.com
3
QUANTITY
1
1
1
1
1
1
2
1
2
1
1
1