Garland ROLL & COMB 602 QG-V21 Manual De Instrucciones página 41

8.1. MAINTENANCE AND CARE AFTER USE
Perform the following maintenance operations and
care when you have finished working with the machine
to ensure the smooth running of this machine in the
future.
8.1.2. CLEANING
Keep the machine clean, especially the area around
the fuel tank and the areas near the air filter.
Other areas:
Clean the rest of the machine with a cloth dampened
with water. Never use gasoline, solvents, detergents,
water or any other liquid .
8.1.3. CHECKING THE ENGINE'S OIL LEVEL
- Place the machine on a flat, horizontal and
uncluttered surface.
- Unscrew the oil filler cap.
- Clean the dipstick from the oil with a cloth.
- Insert the rod and screw on the oil cap.
- Unscrew the plug again and check the mark left
by oil on the dipstick. The mark left by the oil must
be between the minimum and maximum marks.
- If the mark is below the minimum, add a little more
oil and recheck.
- If the mark is above the maximum, you will have
to remove oil from the crankcase. To do this, tilt
the lawnmower and let out a little oil (put a
container at the end of the tube to prevent oil
spilling on the machine or the ground).
8.2. PERIODIC MAINTENANCE
Always use a suitable replacement in order to obtain
adequate product performance and avoid damage
and risks to the machine and user. Spare parts must
be purchased from the dealer's technical service.
The use of unofficial spare parts can lead to risks of
accident, personal injury to the user and breakage of
the machine.
Carry out maintenance as often as indicated in the
following table:
Operation
Before each use
After the first 2 hours
of use
After the first 5 hours
of use
Every 25 hours of use
Every 50 hours of use
Every 100 hours
of use
Every 300 hours
of use
First use of the
season
After the last use of
the season
41/100
English
• •
•
•
• •
• • •
• •
•
•