Festool PRECISIO CS 50 EB Instrucciones De Servicio/Lista De Piezas De Repuesto página 19

router comes to a standstill.
Service your machine regularly to ensure
that it functions properly:
- Vacuum off dust deposits
- Keep the guide bars (1.10) clean and gre-
ase them regularly
- A worn or damaged bench insert is to be
replaced
- The slider (11.1) can be used to open the
hatch (11.3) to enable removal of cutting
residues from the lower protective cover.
In order to remove larger deposits, the
hatch can be opened completely by remo-
ving the screw (11.2). Prior to commis-
sioning, the hatch must be closed again!
- On completion of your work, wind the
power cable around the holders (2.1).
- A damper means that the saw unit runs
back evenly across the entire drawing
length. If this is not the case, the damper
can be adjusted through the hole (2.5).
9 Accessories, tools
Use only original Festool accessories and
Festool consumable material designed for
this machine because these components
are designed specifi cally for the machine.
Using accessories and consumable material
from other suppliers will most likely affect
the quality of your working results and
limit any warranty claims. Machine wear
or your own personal workload may incre-
ase depending on the application. Protect
yourself and your machine, and preserve
your warranty claims by always using ori-
ginal Festool accessories and Festool con-
sumable material!
Festool offers a comprehensive range of
accessories that ensures versatile and ef-
fective deployment of your machine, e.g.
table widening, table lengthening, sliding
table, mitre guide, transport rollers, ex-
traction set.
In order to be able to saw different mate-
rials quickly and cleanly, Festool offers saw
blades that are specially designed for your
machine.
The accessory and tool order number can
be found in the Festool catalogue or on the
Internet under "www.festool.com".
All manuals and user guides at all-guides.com
10
Our equipment is under warranty for at
least 12 months with regard to material or
production faults in accordance with nati-
onal legislation. In the EU countries, the
warranty period is 24 months (an invoice
or delivery note is required as proof of
purchase). Damage resulting from, in par-
ticular, normal wear and tear, o-verloading,
improper handling, or caused by the user
or other damage caused by not following
the operating instructions, or any fault ack-
nowledged at the time of purchase, is not
covered by the warranty. Damage caused
by the use of non-original accessories and
consumable material (e.g. sanding pads)
is also excluded.
Complaints will only be acknowledged if
the equipment has not been dismantled
before being sent back to the suppliers or
to an authorised Festool customer support
workshop. Store the operating instructions,
safety notes, spare parts list and proof of
purchase in a safe place. In addition, the
manufacturer's current warranty conditions
apply.
Note
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
19
Warranty