Technical Features - METRICA 61345 Manual De Instrucciones

CALIBRATION CONTROL
HORIZONTAL PLANE
X1
Place the unit about 30 m from a wall as shown in the drawing
above. Position the unit with the X1 axis facing the wall.
Turn on the unit and intercept the horizontal beam (h1).
Rotate the device 180 °, turn on and intercept the horizontal
beam (h2).
The vertical distance between 2 points (h1 and h2) must be less
than 3 mm.
Repeat the same procedure for the Y-axis.
AXIS X1
AXIS X2
DISTANCE 30 M

TECHNICAL FEATURES

Levelling accuracy
Self-levelling range
h1
Gradient adjustment range
Levelling system
Autonomy
h2
Working range
Rotation values
Scanner function
Signal out of leveling
Laser type
laser power
Batteries
Size
Operating temperature
Weight (without batteries)
Water resistance
Thread for tripod connection
Remote control range
Remote control batteries
Receiver batteries
horizontal ±3 mm / 30 m
vertical ± 5 mm / 30 m
± 5°
± 10%
Fast electronic sensor
~ 30 hours
500 m Ø
0 - 60 - 120 - 300 - 600 r/min.
10° - 45° - 90° - 180°
Yes
635 nm
Class II
4 x NiMH C4000mAh 1.2V
rechargeable
220 x 220 x 210 mm
-10 °C / +50 °C
3.5 Kg
IP 54
5/8"
~ 50 / 20 m (in/out)
2 x 1.5 V DC
1 x 9 V DC