Remote Control - METRICA 61345 Manual De Instrucciones

inclination on the X axis (indicated on the cover of the unit)
• Press the "X / Y" (G) key: "Y" flashes on the display
• Press the "+" and "-" buttons to adjust the percentage of the
incline on the Y axis (indicated on the cover of the unit)
• Press the "X / Y" (G) key again to confirm the data
The rotation stops and the instrument is set to the defined
values.
The rotation starts again using the date settings
To change the setting data, press the CAL (H) key twice and
repeat the procedure.
• To return to the auto-leveling position at 0 rpm, turn the in-
strument off and on again
SLOPE FUNCTION (TO ADJUST THE INCLINATION)
Manual:
Press and hold the button (A) for more than 5 seconds
• The symbol appears on the display
THE INSTRUMENT IS NO LONGER SELF-LEVELING
• Press the "X / Y" (G) button
• "X" appears on the display
• Press the "+" and "-" buttons to visually adjust the radius to
the desired point
• Press the "X / Y" (G) key: "Y" appears on the display
• Press the "+" and "-" buttons to visually adjust the radius to
the desired point
• Press the "X / Y" (G) key again to confirm the data
To turn off the instrument, briefly press the green button (A)

REMOTE CONTROL

Point the remote control perpendicular to any side of the unit.
Usable functions:
1. Rotation
2. Scanner
3. Slope (inclinations)
RECEIVER
3 buttons:
1. ON / OFF
2. To activate or exclude the acoustic signal.
3. To select the measurement sensitivity (fine or medium)