Ec-Declaration Of Conformity; One-Key; Batteries; Transporting Lithium Batteries - Milwaukee M12 PL Manual Original

1.5 EC-declaration of conformity

Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 PL is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: http://services.milwaukeetool.eu.

1.6 One-key™

To learn more about the ONE-KEY functionality for this tool, please reference the Quick Start guide included with
this product or go to www.milwaukeetool.com/one-key. To download the ONE-KEY app, visit the App Store or
Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth communication will be disconnected. It needs to be reset
manually to recover.
We considered the results to be within our minimum acceptable performance level according to EN 55014-2:2015
/ EN 301489-1 V2.2.3/ EN 301489-17 V3.1.1.
One-key™ indicator
Solid Blue: Wireless mode is active and ready to be confi gured via the ONE-KEY™ app.
Blinking Blue: Tool is actively communicating with the ONE-KEY™ app.
Blinking Red: Tool is in security lockout and can be unlocked by the owner via the ONE-KEY™ app.

1.7 Batteries

Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.

1.8 Transporting lithium batteries

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice

1.9 Maintenance

Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been
described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
ENGLISH 3