Milwaukee M12 PL Manual Original página 21

4. Keeping the PIPELINE LOCATOR vertical, walk across the area to be checked, keeping the orientation so that
the locator stem is in line with the direction of walking (See diagram above).
5. Continue in a grid across the area.
6. If at any time, the meter reading starts to increase, carefully move the locator side to side to detect the
maximum signal. Use the peak level indicator to help confi rm the correct position.
Move the locator side to side while looking for maximum response from the bar graph
7. Rotate the PIPELINE LOCATOR on its axis to obtain the maximum signal. The PIPELINE LOCATOR is now
directly over the line and with the stem across the line.
8. The direction can also be found by rotating until the smallest signal is detected. The stem is then in line with
the cable/pipe.
9. Continue to locate the position of the line at regular intervals until its course is known through the target area.
ENGLISH 20