Tracing The Push Cable - Milwaukee M12 PL Manual Original

The signal strength (#5) and bar graph (#1) at their highest when over the utility.

7.5 Tracing the Push Cable

1. Switch on the PIPELINE LOCATOR and use the
TRACE mode with the frequency matching the Milwaukee WIRELESS MONITOR or Milwaukee PIPELINE
INSPECTION APP.
Line Direction Indicator - In the presence of a locate signal, the line direction indicator will align itself parallel
to the push cable being located. This ensures that the operator is aware of the direction of the push cable.
2. Find the push cable direction - When the line direction indicator is in line with the PIPELINE LOCATOR's
handle, this is the Indication of the direction of the push cable.
When the locator is in line with the push cable, the white section of the line direction indicator will turn blue.
Pivot the PIPELINE LOCATOR and rotate it on its axis while watching the line direction indicator. When the
handle is in line with the push cable, the line direction indicator will fl ash and turn blue.
Pivot the Locator and rotate it on its axis while watching the line direction indicator.
3. Next, adjust the sensitivity control, using the
ENGLISH
button to put the PIPELINE LOCATOR into the LINE
buttons, so that the display indicates approximately 50%.
17