Obligations Of The Trainees; Work And Safety Instructions; General Information; Mechanical Components - Festo 8116512 Instrucciones De Servicio

4.3 Obligations of the trainees

All personnel tasked with working on the MPS
commencing work:
•
Read the chapter concerning safety and the warnings in these operating instructions.
•
Familiarize themselves with the basic regulations regarding work safety and accident prevention.

5 Work and safety instructions

5.1 General information

•
Trainees should only work with the components and systems under the supervision of
an instructor.
• Observe the specifications included in the technical data for the individual
components, and in particular all the safety instructions!
•
Wear personal safety equipment (safety goggles, safety shoes) when working on
circuits.

5.2 Mechanical components

•
Switch off the power supply!
–
–
–
•
Risk of injury during troubleshooting!
Use a tool such as a screwdriver for actuating mechanical limit switches.
© Festo Didactic 8116523

are obliged to complete the following steps prior to
Switch off both working and control energy before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Observe possible overrunning of the actuators.
CAUTION
WARNING
Adaptive shape gripper
35