Removing The Tandem Car Seat Adaptors; Fitting The Tandem Car Seats; Removing The Tandem Car Seats; Tandem Modes - Kiddy evostar 1 Manual De Uso

All manuals and user guides at all-guides.com

6.8. Removing the tandem car seat adaptors.

Depress the grey buttons on the car seat adaptors (fig. 43; no. 1) and lift off the
chassis (fig. 43; no. 2).

6.9. Fitting the tandem car seats.

Lower the car seats onto the adaptors and press down firmly until the car seats
clicks into place (fig. 44).
WARNING
Ensure the car seat is locked into place by gently
pulling the car seat upwards.
Note: Always fit the lower car seat first, parent facing. Always fit the upper car
seat parent facing.

6.10. Removing the tandem car seats.

Depress the buttons on either side of the car seat (fig. 45; no. 1+2) and lift off the
adaptors (fig. 45; no. 3).

TANDEM MODES

WARNING
Never attempt to use the Evostar 1 in any other
combinations than shown.
1. Tandem Seat Units (fig. 46)
2. Tandem Carrycots (fig. 47)
3. Forward facing lower carrycot, parent facing upper car seat (fig. 48)
4. Forward facing lower seat unit, parent facing upper car seat (fig. 49)
5. Forward facing lower carrycot, forward facing upper seat unit (fig. 50)
6. Parent facing lower Car Seat, forward facing upper seat unit (fig. 51)
EN
26 26