Removing The Bumper Bar; Adjusting The Seat Unit; Adjusting The Calf Support; Fitting/Removing The Seat Unit Hood - Kiddy evostar 1 Manual De Uso

Ocultar thumbs Ver también para evostar 1:

Tabla de contenido

Idiomas disponibles

All manuals and user guides at all-guides.com

release button (fig. 15). Important: Ensure the bumper bar is locked in place

before use by pulling the bumper bar upwards.

3.3. Removing the bumper bar

Press the small buttons on the seat unit under the bumper bar (fig. 16; no. 1) and

pull the bumper bar away from the seat unit (fig.16; no. 2).

Note: The bumper bar can be released one side at a time to allow easy access for

placing your child in or removing your child from the seat unit (fig. 17).

Lift the adjustment handle on the top side of the seat unit (fig. 18; no. 1) and

adjust the seat to the desired position (fig. 18; no. 2). The seat unit will lock into

position when the handle is released.

Note: The seat unit has 3 positions.

Pull the calf support upwards to raise.

Depress both grey buttons at the side of the footrest (fig. 19; no. 1) to lower into

the desired position.

Note: The calf support has 4 positions (fig. 19; no. 2).

Attach and fasten the zip; push the plastic clips firmly onto the seat unit frame

then close the clips (fig. 20). To remove; unfasten the clips from the seat unit

frame and open the zip.

Fit together the two connectors on the harness straps and push firmly into the

buckle housing until they click together (fig. 21).

Tabla de Contenido

Tabla de contenido