Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
seat upwards from the chassis (fig. 38; no. 2). Remove the adaptor cups.
6.5. Fitting the tandem carrycots.
Fit the tandem adaptors as described in point 6.1. Holding the lower carrycot by
the carry handle; guide the carrycot in horizontally foot-end first until the fittings
on the carrycot line up with the fittings on the tandem adaptor. Push the carrycot
into the tandem adaptor until it locks into place with a click. Fit the upper car-
rycot into the upper position by lowering it into the tandem adaptor until it too
locks into position with a click (fig. 39).
Note: Always fit the lower carrycot first, in the forward facing position. Always fit
the upper carrycot in the parent facing position.
The carrycot hood has an intermediate position (45 degrees) to allow viewing
when the carrycot is used in the tandem mode, lower position.
6.6. Removing the tandem carrycots.
Depress the buttons on the side of the carrycots (fig. 40; no.1) and lift upwards
from the chassis (fig. 40; no. 2).
6.7. Fitting the tandem car seat adaptors.
Fit the tandem adaptors (fig. 41) as described in point 6.1. Fit the lower car seat
adaptors (curved) to the lower position until they click into place.
Fit the upper car seat adaptors (straight) to the upper position until they click
into place (fig. 42).
The adaptors are marked L for left and R for right from the perspective of standing
behind the handle of the chassis.
WARNING
Ensure the adaptors are engaged before use by
pulling them upwards.
25
25
All manuals and user guides at all-guides.com
Capítulos
Tabla de contenido
