Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
6. Using the Evostar 1 in tandem mode
6.1. Fitting the tandem adaptors.
Insert the tandem adaptors (fig. 33) onto the left and right sides of the main
chassis housings until it locks into place with a click (fig. 34). Ensure the locating
hook is aligned with the locating pin on the rear lower leg.
WARNING
Ensure the adaptors are engaged before use by
pulling them upwards.
6.2. Removing the tandem adaptors.
Depress the grey buttons (fig. 35; no. 1), un-hook the lower section from the rear
leg and remove from the chassis (fig. 35; no. 2).
6.3. Fitting the tandem seat units.
Fit the tandem adaptors as described in point 6.1. Fit the lower seat unit adaptor
cups (fig. 36) on to the seat legs (left and right). With the chassis handle fully
extended, lower the seat unit into the tandem adaptors until it locks into place
with a click (fig. 37).
Note: The adaptor cups are only for use with the tandem seat in the lower po-
sition.
Note: Always fit the lower seat first in the forward facing position. The lower seat
unit has a 2 position recline only. Do not try force the seat into the 3rd recline
position. Always fit the upper seat unit in the forward facing position.
6.4. Removing the tandem seat units.
Depress the grey buttons on the side of the seat unit (fig. 38; no. 1) and lift the
EN
24
24
Capítulos
Tabla de contenido
