Ice and Water
Dispenser Features
(select models)
Dispenser Light
(select models)
A light activates within the dispenser area at full power
when dispensing ice or water with the main dispenser
pad.
Dispenser Pad
The Dispenser Pad is located on the back wall of the
dispensing area. When the dispenser pad is pressed,
the selection chosen on the dispenser control panel
will dispense.
Removable Tray
The Removable Tray at the bottom of the dispenser
area is designed to collect small spills and may be
easily removed for cleaning and emptying purposes.
Important: Removable tray does not drain. Do not
allow tray to overflow. If it does, remove tray and wipe
up overflow.
DISPENSER
CONTROL
PANEL
DISPENSER
PAD
REMOVABLE
TRAY
Water Dispenser Operation
CAUTION
To avoid personal injury or property damage,
observe the following:
• Do not put fingers, hands or any foreign object
into dispenser opening.
• Do not use sharp objects to break ice.
• Do not dispense ice directly into thin glass, fine
china or delicate crystal.
Ice Maker Operation
• To turn ice maker On, push arm down from locked
position.
• Lift arm up and lock into position to turn ice maker
Off.
Note:
During initial use of water dispenser, allow
up to one minute delay while water tank fills before
water dispenses. Discard first 10-14 glasses of water
after initially connecting refrigerator to household
water supply and after extended periods of nonuse.
To Use Dispenser Pad:
• Choose water selection from dispenser control panel.
• Press sturdy, wide-mouthed container against
dispenser pad. When dispensing crushed ice, hold
container as close to chute as possible to reduce
spraying.
• Release pressure on dispenser pad to stop water
dispensing. A small amount of water may continue to
dispense and collect in dispenser tray. Large spills
should be wiped dry.
14