Switching Auto Pi Seek; Switching The Warning Tone; Adjusting The Brightness - Pioneer DEH-P6500R Manual De Operación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Section
Initial Settings
09
Note
The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Press FUNCTION to select Auto PI.
Press FUNCTION repeatedly until Auto PI ap-
pears in the display.
2
Press a or b to turn Auto PI on or off.
Pressing a or b will turn Auto PI on or off
and that status will be displayed (e.g.,
Auto PI :ON).

Switching the warning tone

If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1
Press FUNCTION to select Warning.
Press FUNCTION repeatedly until Warning
appears in the display.
2
Press a or b to turn Warning on or off.
Pressing a or b will turn Warning on or off
and that status will be displayed (e.g.,
Warning :ON).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
38
En
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com
using auxiliary equipment connected to this
unit.
1
Press FUNCTION to select AUX.
Press FUNCTION repeatedly until AUX ap-
pears in the display.
2
Press a or b to turn AUX on or off.
Pressing a or b will turn AUX on or off and
that status will be displayed (e.g.,
AUX :ON).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the cars headlights are turned on. You
can switch dimmer on or off.
1
Press FUNCTION to select Dimmer.
Press FUNCTION repeatedly until Dimmer ap-
pears in the display.
2
Press a or b to turn Dimmer on or off.
Pressing a or b will turn Dimmer on or off
and that status will be displayed (e.g.,
Dimmer :ON).

Adjusting the brightness

You can adjust the display brightness. Initially
this mode is set to 12.
1
Press FUNCTION to select Brightness.
Press FUNCTION repeatedly until Brightness
appears in the display.
Tabla de contenido
loading

Tabla de contenido