Technical Specifications; Preliminary Checks - BFT Botticelli VENERE D Instrucciones De Uso Y De Instalacion

Thank you for buying this product, our company is sure that you will be more
than satis ed with the product's performance. The product is supplied with a
"Warnings" lea et and an "Instruction booklet". These should both be read care-
fully as they provide important information about safety, installation, operation
and maintenance. This product complies with the recognised technical standards
and safety regulations. We declare that this product is in conformity with the
following European Directives: 2004/108/CE, 2006/95/CE, 98/37/EEC, 99/05/EEC
(and subsequent amendments).
1) GENERAL SAFETY
WARNING! An incorrect installation or improper use of the product can cause
damage to persons, animals or things.
should be read carefully as they provide important information about safety,
installation, use and maintenance.
of children's reach.
ence.
in the present documentation. Any other use not speci ed in this documenta-
tion could damage the product and be dangerous.
speci ed in the present documentation.
European Directives: 2004/108/CEE, 2006/95/EEC, 98/37/EEC and subsequent
amendments. As for all non EEC countries, the abovementioned standards as
well as the current national standards should be respected in order to achieve
a good safety level.
failure to observe Good Technical Practice when constructing closing structures
(door, gates etc.), as well as from any deformationwhich might occur during
use.
ropean Directives: 2004/108/CEE, 2006/95/EEC, 98/37/EEC and subsequent
amendments.
ing a contact opening distance equal to or greater than 3,5 mm.
power supply mains.
(doors, gates etc.) and all system components provided with an earth termi-
nal.
to protect the area from any danger caused by squashing, conveying and
shearing.
be easily seen, and x a Warning sign to the structure.
and correct operation when other manufacturers' components are used.
the company.
opening operation in case of emergency.
area.
avoid unintentional automation activation.
system, and always request the assistance of quali ed personnel.
not allowed.
by the EN 12978 Standard.
higher than 1.5 m.
"WARNING: risk of squashing".
Regularly check that the door reverses its movement when colliding with an
obstacle 50 mm away from the oor and, if necessary, set it correctly.
2) GENERAL OUTLINE
The BOTTICELLI system is suitable for motorising sectional doors ( g. 3), protrud-
ing fully retracting spring-operated overhead doors ( g. 2) and counterweight
overhead doors provided with an appropriate towing arm ( g. 4). The overhead
door must not be higher than 3 metres. Its easy installation allows fast tting
without needing the door to be modi ed. The irreversible gearmotor keeps the
door locked in the closing position.
All manuals and user guides at all-guides.com
INSTALLATION MANUAL

3) TECHNICAL SPECIFICATIONS

3.1) Actuator
Power supply:....................................................230V
Motor voltage:.................................................................................................................24V
Max. power absorbed from mains:..............................................................................180W
Lubrication:.................................................................................................permanent grease
Towing and pushing force:..............................................................................................600N
Average speed:..............................................................................................................5 m/min
Impact reaction:..........................................integrated torque limiter on control panel
Manoeuvres in 24 hours:........................................................................................................20
Limit switch:..................................................................................Electronic with ENCODER
Courtesy light:..............................................................................24V
Working temperature:.......................................................................................-15°C / +60°C
Degree of protection:..........................................................................................................IPX0
Motor head weight:...............................................................................................................5kg
Noise level:.....................................................................................................................<70dB(A)
Dimensions:.....................................................................................................................see g.1
-
(*) Available in all mains voltages.
(**)By turning the motor head by 90° (Fig.11) the useful stroke will be 2580 mm.
(***)By turning the motor head by 90° (Fig.11) the useful stroke will be 3180 mm.
4) ACTUATOR INSTALLATION

4.1) Preliminary checks

4.2) FITTING
After unpacking, dispose of the parts which make up the package properly, by
-
etc.) according to the national rules in force.
1) Remove the existing locking bolt from the cremone bolt of the door.
2) Fit the metal wall bracket to the track-holder bracket using the screws sup-
-
3) In order for the track to be correctly xed, mark the mid-point of the door,
4) Drill the ceiling using a D.10 bit, with reference to the markings made previ-
5) With the help of an adequate support, lift the entire motor, screw the screws
6) Rest the motor onto the oor (taking care not to damage it) and x the
7) Lift the motor-driven head until everything rests against the ceiling and in-
8) In the case where the motor is not directly xed to the ceiling, t the brack-
10) Release the carriage and x the anchoring brackets to the door panel
11) Check that the carriage and anchoring bracket screws provide for correct
12) Stick the adhesive labels supplied next to the dangerous points (Fig. 5).
5) CHAIN TIGHTENER ADJUSTMENT (BOTTICELLI)
The operator supplied is already calibrated and inspected. Should the chain ten-
sion need to be adjusted, proceed as shown in g. 15.
WARNING: the anti-tear rubber element must never be completely com-
pressed. Scrupulously check that the rubber does not become totally com-
pressed during operation.
6) ELECTRICAL INSTALLATION SET-UP (Fig.16)
M) Actuator
Ft) Transmitter photocell
Fr) Receiver photocells
T) 1-2-4 channel transmitter.
Arrange for the connections of accessories and safety and control devices to
reach the motor unit, keeping the mains voltage connections clearly separate
from the extra low safety voltage connections (24V) by means of the appropriate
cable holder ( g. 8 ref. 5P1).
Proceed to connection following the indications given in the wiring diagram.
The cables for connecting the accessories must be protected by a raceway (fig. 8 ref. 5C1).
components.
the door structure.
any unnecessary appliances.
plied as standard (Fig.12 Ref.E). The screws must not be tightened, so that
the bracket can be rotated.
position the BIN onto the ceiling and mark the holes (Fig.6).
Make sure that the distance between the track and the door panel is com-
prised between 108 and 166 mm (see Fig.14). If this is not the case, use the
brackets provided (Fig.10). If the distance is smaller, the towing plate must
be shortened. The table in Fig.14A gives the various combinations for fas-
tening the bracket to the overhead door.
ously, and insert the plugs.
onto the track-holding bracket without xing them to the door frame
(Fig.9A) or, if the height allows it, t the bracket to the masonry lintel by
means of plugs (Fig.9B).
articulated bracket to the door frame or to the ceiling (Fig.9A, Fig.9B).
sert the xing screws which lock the track.
ets as shown in Fig.10 Ref.C, after marking and drilling the holes with refer-
ence to the brackets.
ent types of xing methods, see the previous gures.
(Fig.14). The distance allowed between track and sectional door is 108 to
166 mm. In case of greater distance, it is necessary to use the brackets and
lower the motor; in case of shorter distance, it is necessary to shorten the
towing plate.
play of the towing bar.
ENGLISH
~
±10%, 50/60Hz single-phase (*)
~
25W max, E14 bulb
-
15
BOTTICELLI VENERE D -