Transport - Jung JLA-e 5/12 G Manual De Instrucciones

> Gradually raise the transport load with the jacks in
parallel and prop up with stable base supports until
it is 5 mm above the specified height. Due to the
danger of tipping, avoid large inclinations that can
shift the centre of gravity. This is particularly a danger
for unstable transport loads.
> Move both cassettes of the adjustable transport
trolley underneath.
> Adjust and lock the connecting rod.
> Slowly and carefully lower the transport load onto
the trolleys.
> Use wedges to secure the trolley against rolling.
> Position the electrically driven trolley to the determi-
ned location.
Extend the rotary plate until the transport goods are
lifted.
NOTE
Load the turntable only centrally in the area of the ball
bearing.
NOTE
When the load is lifted with the electrically driven
trolley, a height difference results between the steering
gear and trolley.
WARNING
In the case of short, heavy loads, the height difference
can become a tipping hazard.
© JUNG Hebe- und Transporttechnik GmbH
Electrically driven trolleys JLA-e 5/12 G with stroke and JLA-e 15/30 G with stroke

4.6.10 Transport

Transport may only be carried out on a level, clean,
load-bearing and dry surface.
Do not move on a pitch. Maintain a safety distance of
3 m.
A suitable roll-away safeguard is to be provided to
prevent potential rolling-away.
Do not exceed the permissible unbraked trailer load.
> Clean the transport path before transporting and clear
away any loose objects.
> Move the transport trolley by hand or by means of a
towing vehicle to the desired location.
NOTE
WARNING
WARNING
WARNING
- 53 -